AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 79)

SIP – DECT OM System Manual Release 2.1 6 OM Management Portal (OMP)
depl-1230/1.3 Page: 79 (196)
2 – Main menus
The OMP provides two main menus which are available in all program situations:
• General menu, see chapter 6.11.
• Help menu, see chapter 6.12.
3 – Navigation panel
Both configuration and monitor mode contain a navigation panel. This panel contains the
mode-dependant menu.
4 – Status bar
The status bar is located at the bottom of the main window. It shows the following items:
• OMP status: shows state “Ready” or “Error”. In case of error additional error information
will be shown.
• PARK,
• Subscription allowed (on/off),
• Auto-create on subscription (on/off),
• Connection status to OMM: If connected to the OMM, the IP address of the OMM is
displayed.
Optionally the following status information will be inserted if applicable:
• Active filter (on/off): Indicates if tables with RFP or PP (user/device) datasets are filtered
(see also chapters 6.7.1.8 and 6.8.10).
6.4 “Status” Menu
The system status is displayed after startup of OMP. The Status panel provides information
about the system health state.
The following health state items are displayed:
• Synchronization state : indicates the current synchronization state for all RFPs (see
chapter 6.7.5).
• Standby OMM : indicates if the status of the standby OMM (see chapter 7.11).
• Database import/export : indicates the status of a current import/export (see chapter
6.5.4).