AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 11)

SIP – DECT OM System Manual Release 2.1 1 Overview
depl-1230/1.3 Page: 11 (196)
Release 1.8 Release 2.1 or later
RFP OMM Linux PC
OMM
RFP OMM Linux PC
OMM 2
Message send n.a. n.a. Yes 2 Yes 3
Locating n.a. n.a. Yes 3 Yes 3
1 available for field trial on request
2 build in license for L-RFP installation; requires a license for standard RFP installations
3 requires a license; not available for L-RFP installations
1.4 About the Portable Parts
Portable Part (PP) is DECT standard terminology and in the context of the SIP – DECT
solution is interchangeable with handset. Aastra provides the following handsets:
Aastra 142d, Aastra 610d / Aastra 620d / Aastra 630d.
Aastra 142d Aastra 610d Aastra 620d Aastra 630d
Please be aware of differences in regulatory requirements between North America and all
other areas of the world. These differences lead to different Aastra 142d variants which use
specific frequency bands and field strengths:
• Aastra DECT 142 (NA)
- Frequency Band 1920 to 1930 MHz
- 60 duplex channels
- 100 mW (maximum output per active channel)
- 5 mW (average output per active channel)
• Aastra 142d (EMEA)
- Frequency Band 1880 to 1900 MHz
- 120 duplex channels
- 250 mW (maximum output per active channel)
- 10 mW (average output per active channel)
The Aastra 610d / 620d / 630d supports both the NA and EMEA regulatory requirements.