AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 40)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 40 (196)
5.4.3 “User account” Menu
After initial installation or after removing the configuration file, the OMM Web service is
accessible via a build-in user account with user “omm” and password “omm”.
If the default build-in user account is active, the administrator has to change the default
account data of the “Full access” and “root” account. The meaning of the different account
types is described in section 7.12.1.
Please note: The OMM will force to alter the default account data. As long as the
passwords are unchanged, the OMM will not allow any other configuration.
These settings which are case sensitive can be changed on the User Account web page.
1 Account type : Select the account type you wish to change.
2 Active : This setting applies to the Read only access account. Using this account, a user
is not allowed to configure any item of the OMM installation. The account can be
deactivated.
3 User name : If desired, enter a new user name.
4 Old Password : To change the password the old password must typed in again.
5 Password , Password confirmation : Enter the appropriate data in these fields.
The OMM has several rules to check the complexity of the new password, hence a new
password will not be accepted when any of this rules are violated:
– the new password is not 5 or more characters long,
– the new password does not contain characters from at least 3 of the following groups:
lower case, upper case, digits or other characters,
– the new password has 50% or more of the same character ('World11111' or
'W1o1r1l1d1'), or
– the new password contains one of the following items (either upper or lower case as
well as forward or backward):
– account name,
– host name (IP address),
– old password, or