Enabling / disabling pp event log, System features” menu, General settings” menu – AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN User Manual

Page 113: 11 enabling / disabling pp event log, Ystem features, 9 “system features” menu, 1 “general settings” menu

SIP – DECT OM System Manual Release 2.1

6 OM Management Portal (OMP)

depl-1230/1.3

Page: 113 (196)

6.8.11 Enabling / Disabling PP Event Log

You can store an PP event log file in monitor mode. Proceed as follows:

1 To enable/disable the PP event log, click on the

Log events

command in the task bar on

the right of the

Portable parts

panel:

- PP event log is enabled.
- PP event log is disabled.

2 Repeat step 1 to disable/enable the PP event log.

The PP event log will be stored in a file called “pp_event.log“. This file can be found in the
users home directory:

•

on a Linux it is located under ‘~/.oamp’,

•

on a windows system under ‘c:/Users//MyDocuments/.Oamp’.

6.9

“System features” Menu

The

System features

menu provides the following entries:

Configuration mode

Monitor mode

See chapter

General settings

6.9.1

Feature access codes (FAC)

6.9.2

Alarm triggers

6.9.3

Digit Treatment

6.9.4