beautypg.com

Selecting the right dhcp server, Rfp led status, 2 selecting the right dhcp server – AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN User Manual

Page 132: 5 rfp led status

background image

SIP – DECT OM System Manual Release 2.1

7 Configuration und Administration Aspects

depl-1230/1.3

Page: 132 (196)

17

Belarus

18

Estonia

19

Latvia

20

Lithuania

21

Ukraine

22

Norway

24

Sweden

25

Taiwan

100

North America

101

France

102

Australia

7.5.4.2 Selecting the Right DHCP Server

The DHCP client requests its own IP address using code 50. The DHCP client will select the
DHCP server that offers the currently used IP address. Additionally the mandatory options
must be offered otherwise the DHCP offer is ignored by the DHCP client.

If no matching reply was received, the DHCP client resends the request 2 times after
1 second. Then the DHCP client will wait for 1 minute before resending 3 requests again.

If the DHCP client cannot accept an DHCP offer within 3 minutes the RFP is rebooted.

7.5.5

RFP LED Status

RFP 32 IP / RFP L32 IP / RFP 32 NA

RFP L42 WLAN / RFP 42 WLAN

LED 1 Info / Booter; LED 2 System;
LED 3 DECT; LED 4 (unused)

LED 1 Info / Booter; LED 2 System
LED 3 DECT; LED 4 WLAN