AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 138)

SIP – DECT OM System Manual Release 2.1 7 Configuration und Administration Aspects
depl-1230/1.3 Page: 138 (196)
Press the Reset configuration button to clean all input fields and additional parameters.
Since the OpenMobility version 1.5, login data can be used to prevent against unauthorized
configuration changes. If authorization is used, mark the
Login checkbox and enter the user
name and the password into the fields User and Password . This OM Configurator is
backward compatible to previous OpenMobility versions without login support.
A forgotten password could not be recovered but deleted using the Factory defaults button.
Send the displayed cookie to the OpenMobility manufacturer support. After receiving the
password reset key from the support, enter it into the
Enter reset key dialog. This will delete
the complete local configurations from the internal flash memory of the RFP, too!
Please note: With the password reset all local configurations inclusively possible existing
OpenMobility configurations will be deleted.
An RFP outside the local LAN segment could also work as proxy. Mark the as proxy
checkbox to enable this functionality. Then the MAC address will be used to address an RFP
in the LAN segment of the proxy RFP. Scanning for available RFPs and configuration of
multiple RFPs via a configuration file could be used also with the proxy mechanism.
Use the Scan button to search for available RFPs in the local LAN segment or via the proxy
mechanism in outside LAN segments. All MAC addresses of the found RFPs will be
displayed in the left RFP list. The status LEDs and the update button are disabled after
scanning for RFPs.