AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN User Manual
Page 18
SIP – DECT OM System Manual Release 2.1
2 Getting Started
depl-1230/1.3
Page: 18 (196)
System: System settings, change PARK and DECT regulatory domain
Note: The RFP L32 IP / RFP L34 IP / RFP L42 WLAN devices provide a build in license as
described here. If you have purchased another license type and e.g. RFP L32 IP /
RFP L34 IP / RFP L42 WLAN devices, you need to upload the license file on the
Licenses
5 Navigate to the
Radio fixed parts
page. Click the
Start
button to start capturing. Wait 10
seconds. Click the
Radio fixed parts
menu entry to refresh the display. If all expected
RFPs are listed, click
Stop
to end capturing.
Radio fixed parts, capture and add new RFPs
6 Click the icon next to the desired entry to add a new RFP to the OMM. The
New radio
fixed part
dialog opens. Enter a
Name
. Enable the
DECT settings
checkbox that assigns
the RFP to
DECT cluster
“1”. Confirm with
OK
. Repeat this step for the second RFP.
7 Navigate to the
Portable parts
page. Click on the
New
button. The
New portable part
dialog opens. Enter a
Name
, a
Number
and a
DECT authentication code
. Confirm with
OK
. Repeat this step for a second DECT portable part with a different
DECT
authentication code
.