AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 58)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 58 (196)
2 Configure the PP, see parameter description below.
3 Press the OK button.
The following parameters can be set in the New portable part resp. the Configure portable
part dialog:
General settings
• Name : The name parameter represents the SIP Display Name field. This parameter is
optional but recommended.
• Number : The number is the SIP account number or extension for the PP.
• IPEI : The IPEI is the DECT 142 / 6xxd handset IPEI number which can be found in the
System Options menu of the DECT 142 / 6xxd handset.