Xerox 701P40016 - Manual (Page 81)

Guide to Printing Using Xerox Production Print Services Using Command Line Client
6-9
2. The job is submitted when you execute the batch file.
The single command mode is often used for batch operation.
To do this, copy and paste the command line and change the
parameters.
NOTE: Do not change other parts of the batch file.
You must have one command line for each separate
command to be executed. The following example displays a
file with two print commands, each to a different printer.
• com.xerox.jxds.frontends.clc.application.JXDS -p/
rebar.ess.c.xerox.com/default -f ./golden.ps -jt ./ticket.xpf
• com.xerox.jxds.frontends.clc.application.JXDS -p/
rebar.ess.c.xerox.com/rebar -f ./golden.ps -jt ./ticket.xpf
Refer to “Command syntax: single command mode,” for further
information on the command structure.
Refer to the “Single command mode commands,” earlier in this
chapter, for a list of the available parameters for the Print
command.
Command quick reference
The following tables list all the commands and parameters for
each mode of the XDS Command Line application.
Table 6-1. Print command mode commands and parameters
Parameter Function Arguments Argument definition
–p Set printer Name of printer
–f Set file to print Name of document file to print
–jt Set job ticket Name of job ticket file
–copies Set number of copies to print <#> Number of copies (numeral)
-sides Set sides to be printed 1-side, 2-side, head-to-toe
-finishing Sets finishing for job no-finish, staple-top-left,
staple-bottom-left, staple-top-
right, staple-dual-left, staple-
dual-right, bind-left, bind-right,
booklet-maker
-user Identifies the sender’s user
name Enter the sender’s user name
–exit Exit XDS Command Line