Xerox 701P40016 - Manual (Page 113)

Guide to Printing Using Xerox Production Print Services Job ticket options
9-21
• [Sides Imaged]: Select 1-sided, 2-sided, or head-to-toe
printing from the pop-up menu in this field. You can also
select [Use Job Setting].
• [Rotation]: Select Printer Default, None, or 180 to rotate
an image.
• [Image Shift]: If you want to shift the page image on the
range of exception pages, follow these steps:
a. In the [Image Shift] field, deselect the [Use Current
Values] check box to enable the [Image Shift] button.
b. Select the [Image Shift] icon to open the Image Shift
dialog box.
c. Enter the desired image shift parameters. Refer to
“Specifying an image shift,” earlier in this chapter, for
an explanation of these parameters.
d. Select [OK] to close the Image Shift dialog box. Your
specifications are displayed in the Image Shift read-
only field on the Exception Pages dialog box.
• [Color]: If the printer supports full color printing and you
want to specify color source and printing parameters for
the exception pages, do the following:
a. In the [Color] field, deselect the [Use Job Setting]
check box.
b. Select the [Color] icon to open the Color dialog box.
c. Make any desired color parameter specifications.
Refer to “Specifying full-color parameters,” later in this
chapter, for an explanation of the color fields.
d. Select [OK] to close the Color dialog box.
• [Anti-aliasing]: To reduce the appearance of jagged lines
and edges in exception page images, select [On] from the
Anti-aliasing pop-up menu.
• [Halftone]: This feature provides the ability to specify the
halftone screen to be used when the job is rendered.
Select a halftone that most closely represents the
frequency you desire.
• [Tone Reproduction Curves]: This option allows you to
select a set of four intensity functions for cyan, magenta,
yellow, and black. The TRC pull-down menu contains a
list of transfer functions that were created at the controller.