Xerox 701P40016 - Manual (Page 118)

Job ticket options Guide to Printing Using Xerox Production Print Services
9-26
– [Same Rendering for All] check box: Causes the
rendering intent that you select from the Images menu to
be used for text and graphics as well. (The Graphics and
Text menus are disabled when you select this check box.)
– Images, Text, and Graphic menus: These three pop-up
menus enable you to select a rendering effect for Images,
Text, and Graphics. For each of these three items, the
following selections are available:
• [Printer Default]
• [Saturation]: Adjusts the print colors to preserve the
amount of color saturation.
• [Relative Colorimetric]: Adjusts the print colors to
account for the viewing illuminant and for the level of
whiteness of the stock.
• [Absolute Colorimetric]: Adjusts the print colors to
account for the viewing illuminant only (not the media
whiteness). This selection provides exact output color
matches from one printer to another.
• [Perceptual]: Also called “photographic rendering.”
Adjusts the print colors to make full use of the range of
colors that the printer supports while preserving the
color relationships. This rendering produces the most
realistic appearance.
• [Pure]: Same as Saturation rendering intent, but with
a bias against halftoning colored text.
• [Automatic]: Selects the printer defaults for all
rendering parameters. Selecting [Automatic] allows
the system to select all rendering options; therefore,
the rendering fields become inaccessible from the
dialog box.
The Destination ICC profiles are defined in the Printer
Capabilities file that was selected in the User Preferences dialog
box. If no Printer Capabilities file has been selected, the
Destination profile list is empty. Refer to “Setting user
preferences,” later in this chapter, for information on selecting a
Printer Capabilities file.
Follow these steps to specify output color parameters:
1. On the Color dialog box, select [Output Color]. The Output
Color Setup dialog box opens.
2. On the Output Color Setup dialog box, make your desired
selections in the [Profile] and [Rendering] fields.