Xerox 701P40016 User Manual
Page 80
Using Command Line Client
Guide to Printing Using Xerox Production Print Services
6-8
Setting the RegFileLoc
For information on creating and setting up the printer discovery
file, refer to the Installation Guide. To set the Printer Registration
File location, use this synatax.
Syntax
RegFileLoc -
Argument
Specifies the location of the Printer Registration file in URL
format.
Argument
RegFileLoc -get
Displays the current location of the Printer Registration File.
Argument
RegFileLoc -help
Displays usage help.
Printing in print command mode
Follow these steps to submit a print job in single command
mode:
1. To set up and print a job in single command mode, you must
edit and execute a batch file that is provided for you in the
folder that XDS Plus is installed in. Use one of the following
options:
•
For Windows use jxdsclc_sc_win32.bat
•
For Solaris use jxdsclc_sc_unix
The following parameters are required for printing:
•
–p followed by a space, then the name of the printer to
which you are sending a job (as displayed on the printer
list)
•
–f followed by a space, then the name of the document
file that you want to print
•
–jt followed by the name of the saved job ticket that you
want to use with the job.
The basic syntax for a printing command is as follows:
–p