Xerox 701P40016 - Manual (Page 100)

Job ticket options Guide to Printing Using Xerox Production Print Services
9-8
Custom finishing is available for some of the Xerox printers. For
availability, refer to the guide titled, Job ticket features guide.” If
your connected printer supports a printer capability file, a pop up
button is available. When selected, the available custom
finishing devices will display.
NOTE: When you are using a Macintosh system, turn on the
Help Balloons option by selecting Help for additional descriptive
help when selecting finishing features.
Specifying collation
The Collation option determines the sequence in which the
finished prints are stacked in the output tray.
• [Printer Default]
• [Collated]: Prints the pages of a document in numerical
sequence.
• [Uncollated]: Prints the requested number of copies of the
first specified page of a document before printing the next
page.
Specifying the image rotation
From the Rotation pop-up menu, select [90], [180], or [270]
degrees if you want to rotate the page image on the printed
sheet.
Specifying an image shift
The options in the [Image Shift] field allow you to offset the
printed image from the vertical or horizontal edges of the sheet.
Shifting the image is particularly useful for finished jobs that
require drilled stock and for preprinted forms.
To shift the printed image for your job, follow these steps:
1. Select the image shift options button to display the Image
Shift dialog box.
2. On the Image Shift dialog box, use the arrow buttons to enter
the amount of shift in the desired direction for side 1 and side
2 as required.
NOTE: When the Image Shift option is set at 0 (zero), the
image is not shifted.
• [Horizontal image shift]: Moves the image horizontally
on the portrait or landscape page. The right arrow shifts
the image towards the right edge of the page and the left
arrow shifts the image towards the left edge of the page.