Xerox 701P40016 - Manual (Page 110)

Job ticket options Guide to Printing Using Xerox Production Print Services
9-18
Specifying front cover or back cover only
You can add just a front cover or a back cover to the print job.
Follow these steps to add one cover and to select the printing
options:
1. Select the [Covers...] icon on the Job Ticket dialog box. The
Covers dialog box opens.
2. Select [Front Only] or [Back Only] from the Covers pop-up
menu. The [Stock] and [Printing on] fields are displayed.
3. From the Stock pop-up menu, select the stock number for the
cover. The properties for the stock that was previously
specified for that number are displayed in the [Stock] field.
4. If you want to select a different stock ID or specify different
properties for the stock number, select the [Stocks...] icon to
open the Paper Stocks dialog box.
a. On the Paper Stocks dialog box, select the same stock
number from the Stocks menu that you selected on the
Covers dialog box.
b. Program the stock for the cover. Refer to “Specifying
stocks for the job” and “Specifying stock properties,”
earlier in this chapter, for further information.
c. Select [OK] to close the Paper Stocks dialog box and
return to the Covers dialog box.
5. Select the sides of the cover that will be printed. The
available options are [None], [Side 1], [Side 2], and [Both
Sides].
6. Select [OK] to save the covers programming and return to the
Job Ticket dialog box. The type of covers that you specified is
displayed below the [Covers] icon on the Job Ticket dialog
box.
If you want to remove the covers programming, select
[Cancel].
Specifying both front and back covers
You can add both a front and a back cover to the print job. Follow
these steps to add both covers and to select their printing
options:
1. Select the [Covers...] icon on the Job Ticket dialog box. The
Covers dialog box opens.