ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 99)

9-2 Remote Node Setup
Figure 9-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
Table 9-1 Fields in Menu 11.1 (Ethernet Encapsulation)
FIELD DESCRIPTION EXAMPLE
Rem Node
Name Enter a descriptive name for the remote node. This field can be up to eight
characters. LAoffice
Active Press [SPACE BAR] to select Yes (activate remote node) or No
(deactivate remote node). Yes
Encapsulation Ethernet is the default encapsulation. Press [SPACE BAR] if you wish to
change to PPPoE or PPTP encapsulation.
Ethernet
Service Type Press [SPACE BAR] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager
(RoadRunner Manager authentication method) or, RR-Telstra
(RoadRunner Telstra authentication method). Choose one of the
RoadRunner methods if your ISP is Time Warner's RoadRunner;
otherwise choose Standard. Standard
Service Type Press [SPACE BAR] to select from Standard, RR-Toshiba (RoadRunner
Toshiba authentication method), RR-Manager (RoadRunner Manager
authentication method) or, RR-Telstra (RoadRunner Telstra
authentication method). Choose one of the RoadRunner methods if your
ISP is Time Warner's RoadRunner; otherwise choose Standard. Standard
Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My Password
fields are not applicable in this case.
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A Edit Traffic Redirect= No
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel.