ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 254)

Prestige 324 Intelligent Broadband Sharing Gateway
10 NetBIOS Filter Commands
The filter types and their default settings are as follows.
NAME DESCRIPTION EXAMPLE
LAN to WAN This field displays whether NetBIOS packets are blocked or
forwarded from the LAN to the WAN. Block
WAN to the LAN This field displays whether NetBIOS packets are blocked or
forwarded from the WAN to the LAN. Block
IPSec Packets This field displays whether NetBIOS packets sent through a VPN
connection are blocked or forwarded. Forward
Trigger dial This field displays whether NetBIOS packets are allowed to initiate
calls. Disabled means that NetBIOS packets are blocked from
initiating calls. Disabled
NetBIOS Filter Configuration
Syntax: sys filter netbios config
where
= Identify which NetBIOS filter (numbered 0-3) to configure.
0 = LAN to WAN
1 = WAN to the LAN
2 = IPSec Packets
3 = Trigger dial
= For types 0 and 1, use on to enable the filter and block
NetBIOS packets. Use off to disable the filter and forward
NetBIOS packets.
For type 2, use on to block NetBIOS packets from being sent
through a VPN connection. Use off to allow NetBIOS
packets to be sent through a VPN connection.
For type 3, use on to allow NetBIOS packets to initiate calls.
Use off to block NetBIOS packets from initiating calls.
Example commands
Command: sys filter netbios config 0 on