ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 103)

9-6 Remote Node Setup
Figure 9-3 Menu 11.1 Remote Node Profile for PPPoE Encapsulation
The next table describes the fields NOT already described in Table 9-1 already.
Table 9-3 Fields in Menu 11.1 (PPPoE Encapsulation Specific Only)
FIELD DESCRIPTION EXAMPLE
Authen This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your Prestige will accept either CHAP or PAP
when requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
CHAP/PAP
Telco Option
Allocated Budget
(min)
The field sets a ceiling for outgoing call time for this remote
node. The default for this field is 0 meaning no budget control. 10
Period(hr) This field is the time period that the budget should be reset. For
example, if we are allowed to call this remote node for a
maximum of 10 minutes every hour, then the Allocated
Budget(min) is (10 minutes) and the Period(hr) is 1 (hour).
1
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= PPPoE Edit IP= No
Service Type= Standard Telco Option:
Service Name= Allocated Budget(min)= 0
Outgoing= Period(hr)= 0
My Login= Schedules=
My Password= ******** Nailed-up Connections= No
Authen= CHAP/PAP
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.