ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual
Page 231
PPTP 19-3Remote
Management
19-3
If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
To disable remote management of a service, select Disable in the corresponding Server Access field.
Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.
If you just wish to block certain users from using these services, then use
filtering – please see menu 21.1.
Figure 19-2 Menu 24.11 – Remote Management Control
Table 19-1 Menu 24.11 – Remote Management Control
FIELD
DESCRIPTION
EXAMPLE
TELNET Server FTP
Server
Web Server
SNMP Server
DNS Server
Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
Server Port
This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management.
53
Menu 24.11 - Remote Management Control
TELNET Server:
Port = 23 Access = WAN only
Secured Client IP = 0.0.0.0
FTP Server:
Port = 21 Access = LAN only
Secured Client IP = 0.0.0.0
Web Server:
Port = 80 Access = LAN only
Secured Client IP = 0.0.0.0
SNMP Service:
Port = 161
Access = LAN only
DNS Service:
Port = 53
Access = LAN only
Press ENTER to Confirm or ESC to Cancel: