ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 58)

Prestige 324 Intelligent Broadband Sharing Gateway
Introducing the SMT and General Setup 5-3
Table 5-1 Main Menu Commands
OPERATION DESCRIPTION
Move down to
another menu To move forward to a submenu, type in the number of the desired submenu and
press [ENTER].
Move up to a
previous menu Press the [ESC] key to move back to the previous menu.
Move to a “hidden”
menu Fields beginning with “Edit” lead to hidden menus and have a default setting of No.
Press [SPACE BAR] to change No to Yes, and then press [ENTER] to go to a
“hidden” menu.
Move the cursor Within a menu, press [ENTER] to move to the next field. You can also use the
[UP]/[DOWN] arrow keys to move to the previous and the next field, respectively.
Entering information You need to fill in two types of fields. The first requires you to type in the appropriate
information. The second allows you to cycle through the available choices by
pressing [SPACE BAR] and then [ENTER].
Required fields All fields with the symbol or ChangeMe must be filled in order be able to save
the new configuration.
N/A fields Some of the fields in the SMT will show a . This symbol refers to an option
that is Not Applicable.
Save your
configuration Save your configuration by pressing [ENTER] at the message “Press ENTER to
confirm or ESC to cancel”. Saving the data on the screen will take you, in most
cases to the previous menu.
Exit the SMT Type 99 at the main menu prompt and press [ENTER] to exit the SMT interface.
5.2.1 Main Menu
After you enter the password, the SMT displays the Prestige Main Menu, as shown next.