ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 253)

NetBIOS Filter Commands 9
Appendix D
NetBIOS Filter Commands
The following describes the NetBIOS packet filter commands.
Introduction
NetBIOS (Network Basic Input/Output System) are TCP or UDP broadcast packets that enable a computer
to connect to and communicate with a LAN.
For some dial-up services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls.
You can configure NetBIOS filters to:
• Block or forward NetBIOS packets from being sent from the LAN to the WAN.
• Block or forward NetBIOS packets from being sent from the WAN to the LAN.
• Allow or deny NetBIOS packets to be sent through VPN connections.
• Block or forward NetBIOS packets from initiating calls.
Display NetBIOS Filter Settings
Syntax: sys filter netbios disp
This command displays the current NetBIOS filter settings.
Diagram 8 NetBIOS Display Filter Settings Command
=============== NetBIOS Filter Status ===============
LAN to WAN: Forward
WAN to LAN: Forward
IPSec Packets: Forward
Trigger Dial: Disabled