ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 189)

Prestige 324 Intelligent Broadband Sharing Gateway
Table 15-2 SNMP Configuration Menu Fields
FIELD DESCRIPTION EXAMPLE
Get Community Type the Get Community, which is the password for the incoming
Get- and GetNext requests from the management station. Public
Set Community Type the Set community, which is the password for incoming Set
requests from the management station. Public
Trusted Host If you enter a trusted host, your Prestige will only respond to SNMP
messages from this address. A blank (default) field means your
Prestige will respond to all SNMP messages it receives, regardless
of source. Blank
Trap: Community Type the trap community, which is the password sent with each
trap to the SNMP manager. Public
Trap: Destination Type the IP address of the station to send your SNMP traps to. Blank
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
15.4 SNMP Traps
The Prestige will send traps to the SNMP manager when any one of the following events occurs:
Table 15-3 SNMP Traps
TRAP # TRAP NAME DESCRIPTION
0 coldStart (defined in RFC-1215) A trap is sent after booting (power on).
1 warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).
2 LinkUp A trap is sent when the link is established.
3 LinkDown A trap is sent when the link is down.
4 authenticationFailure (defined in
RFC-1215) A trap is sent to the manager when receiving any SNMP
get or set requirements with wrong community (password).
6 whyReboot (defined in ZYXEL-
MIB) A trap is sent with the reason of restart before rebooting
when the system is going to restart (warmstart).