ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 162)

13-4 Filter Configuration
You can apply up to four filter sets to a particular port to block multiple types of packets. With each filter
set having up to six rules, you can have a maximum of 24 rules active for a single port.
13.2 Configuring a Filter Set
To configure a filter set, follow the procedure below. Select option 21 from the main menu to display menu
21.
Enter “21” from the main menu.
Figure 13-3 Menu 21 - Filter and Firewall Setup
Enter “1” to display the following menu.
Figure 13-4 Menu 21.1 - Filter Set Configuration
Select the filter set you wish to configure (no. 1-12) and press [ENTER] .
Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Menu 21.1 - Filter Set Configuration
Filter
Set #
------
1
2
3
4
5
6
Comments
------------------
______________
______________
______________
______________
______________
______________
Filter
Set #
------
7
8
9
10
11
12
Comments
------------------
______________
______________
______________
______________
______________
______________
Enter Filter Set Number to Configure= 0
Edit Comments=
Press ENTER to CONFIRM or ESC to CANCEL:
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup