ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 124)

Prestige 324 Intelligent Broadband Sharing Gateway
NAT 11-9
will use Set 1, which supports all mapping types as outlined in Table 11-2. When you select SUA Only,
the SMT will use the pre-configured Set 255 (read only).
The Server Set is a list of LAN side servers mapped to external ports. To use this set (one set for the
Prestige 10), a server rule must be set up inside the NAT Address Mapping set. To configure NAT, enter 15
from the main menu to bring up the following screen.
Figure 11-5 Menu 15 — NAT Setup
11.3.1 Address Mapping Sets
Enter 1 to bring up Menu 15.1 — Address Mapping Sets.
Figure 11-6 Menu 15.1 — Address Mapping Sets
SUA Address Mapping Set
Enter 255 to display the next screen (see also section 11.2). The fields in this menu cannot be changed.
Menu 15 — NAT Setup
1. Address Mapping Sets
2. Port Forwarding Setup
3. Trigger Port Setup
Enter Menu Selection Number:
Menu 15.1 — Address Mapping Sets
1.
255. SUA (read only)
Enter Menu Selection Number: