ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 - Manual (Page 210)

17-8 Firmware and Configuration Maintenance
Figure 17-6 Successful Backup Confirmation Screen
17.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
FTP and TFTP are the preferred methods for restoring your current computer configuration to your Prestige
since FTP and TFTP are faster. Please note that you must restart the system after the file transfer is
complete.
WARNING!
DO NOT INTERUPT THE FILE TRANSFER PROCESS AS THIS MAY
PERMANENTLY DAMAGE YOUR PRESTIGE. WHEN THE RESTORE
CONFIGURATION PROCESS IS COMPLETE, THE PRESTIGE WILL
AUTOMATICALLY RESTART.
17.3.1 Restore Using FTP or TFTP
For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this
chapter.
** Backup Configuration completed. OK.
### Hit any key to continue.###