ZyXEL Communications Intelligent Broadband Sharing Gateway P-324 User Manual

Page 75

Prestige 324 Intelligent Broadband Sharing Gateway

6-8

WAN Setup and Dial Backup

Table 6-5 Menu 11.1 Remote Node Profile (Backup ISP)

FIELD

DESCRIPTION

EXAMPLE

Authen This field sets the authentication protocol used for outgoing calls.

Options for this field are:

CHAP/PAP - Your Prestige will accept either CHAP or PAP when
requested by this remote node.

CHAP - accept CHAP only.

PAP - accept PAP only.

CHAP/PAP

Pri Phone #

Sec Phone #

Enter the first (primary) phone number from the ISP for this remote
node. If the Primary Phone number is busy or does not answer, your
Prestige dials the Secondary Phone number if available. Some areas
require dialing the pound sign # before the phone number for local
calls. Include a # symbol at the beginning of the phone numbers as
required.

Edit PPP
Options

Move the cursor to this field and use the space bar to select Yes and
press [ENTER] to edit the PPP options for this remote node. This
brings you to Menu 11.2 - Remote Node PPP Options (see section
6.2.7.

(default)

Edit PPP
Options

(default)

Rem IP Addr

Leave the field set to 0.0.0.0 (default) if the remote gateway has a
dynamic IP address. Enter the remote gateway’s IP address here if it
is static.

0.0.0.0

(default)

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes
and press [ENTER] to go to Menu 11.3 - Remote Node Network
Layer Options. See the Remote Node Setup chapter for more
information on this menu

(default)

Edit Script
Options

Press [SPACE BAR] to select Yes and press [ENTER] to edit the AT
script for the dial backup remote node (Menu 11.4 - Remote Node
Script). See section 6.2.8 for more details.

(default)

Edit Script
Options

Press [SPACE BAR] to select Yes and press [ENTER] to edit the AT
script for the dial backup remote node (Menu 11.4 - Remote Node
Script). See section 6.2.8 for more details.

(default)

Telco Option