Toshiba PORTEGE M400 User Manual

Page 405

Appendix J Maintenance of TOSHIBA RAID

Appendices

PORTEGE M400 Maintenance Manual (960-541)

[CONFIDENTIAL]

J-7

(2) Check if it is caused by an operation miss or is a failure.

To check if the cause of failure of Port1 is an operation miss or not, analyze the Drive
Log of Port0.

1. In [REDUNDANT] of Port-0, find a log of “Fail this drive” message by PgUp and

PgDn key.

2. If no message of “Fail this drive” message, it is judged that the second HDD is

removed without the operation of removal by TOSHIBA RAID console and
installed again.

(3) How to change the status to OFF LINE

Release the status of “Fail”, using the menu of [Force OFFLINE]. This HDD is not
necessary to be repaired.