Toshiba PORTEGE M400 - Manual (Page 267)

4.10 Wireless LAN card 4 Replacement Procedures
4.10 Wireless LAN card
Removing the Wireless LAN card
To remove the Wireless LAN card, follow the steps below. (See Figure 4-17.)
CAUTION: Do not try to remove the wireless LAN card with the computer turned on.
The computer or the wireless LAN card can be damaged. Do not touch the
connectors on the wireless LAN card on the computer. Debris on the
connectors may cause the wireless LAN card access problems.
1. Peel off the insulator.
2. Remove the following screw and metal plate.
• M2.0×4.0B BIND screw or M2.0×4.0B TORX
screw
×1
3. Disconnect the wireless LAN antenna cables (black and white) from the wireless
LAN card using an antenna coaxial cable disconnector.
4. Remove the following screw and disconnect the wireless LAN card from the
connector on the system board.
• M2.0×4.0B BIND
screw
×1
Wireless LAN antenna
cable (black)
Wireless LAN antenna
cable (white)
Wireless LAN card
Metal plate
Insulator
M2.0
×4.0B BIND
M2.0
×4.0B BIND or M2.0×4.0B TORX
Spacer
(on the back of the
insulator)
Figure 4-17 Removing the Wireless LAN card
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-29