Toshiba PORTEGE M400 - Manual (Page 218)

3 Tests and Diagnostics 3.31 SETUP
3-100 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Moving Within the SETUP Menu and Changing Values
1. Press Å and Æ to move between the two columns. Press ↑ and ↓ to move between
items in a column. Press Fn+ ↑ (PgUp) and Fn + ↓ (PgDn) to move between the
two pages.
2. Press either the Space bar or Back Space to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you
to confirm that you do not want to save your changes. When SETUP is displayed
at the next time, the current configuration appears.
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. To accept the default settings, press End and then press Y.
NOTE: When you execute the default setting, the following settings are not changed:
Password, HDD Password, Core-Multi Processing and Security Controller.