30 hinge assembly, Removing the hinge assembly – Toshiba PORTEGE M400 User Manual

Page 316

4 Replacement Procedures

4.30 Hinge assembly

4.30 Hinge assembly

Removing the Hinge assembly

The following describes the procedure for removing the hinge assembly. (See Figure 4-51
and 4-52.)

1. Remove the following screw and Harness holder.

• M2.5×6.0B FLAT HEAD screw

×1

2. Remove the following screws and LCD harness earth spring.

• M2.5×6.0B FLAT HEAD screw

×1

3. Remove the following screw, antenna cover S and antenna cover T from the slot.

• M2.0×6.0S

S-THIN HEAD screw

×1

Harness holder

M2.5

×6.0B

FLAT HEAD

M2.5

×6.0B

FLAT HEAD

M2.5

×6.0B

FLAT HEAD

M2.0

×6.0S

S-THIN HEAD

Antenna cover S

LCD harness

earth spring

Hinge

assembly

Antenna cover T

Figure 4-51 Removing the hinge assembly (1)

4-78

[CONFIDENTIAL]

PORTEGE M400 Maintenance Manual (960-541)