17 fan, Removing the fan – Toshiba PORTEGE M400 User Manual

Page 287

4.17 Fan

4 Replacement Procedures

4.17 Fan

Removing the Fan

The following describes the procedure for removing the fan. (See Figure 4-31.)

1. Turn over the system board.

2. Peel off the glass tape and disconnect the fan cable from the connector CN8781 on

the system board.

3. Turn the system board face up.

4. Remove the following screws and fan.

• M2.5×4.0B

FLAT HEAD screw

×2

M2.5x4.0B

FLAT HEAD

CN8781

Fan

Fan cable

Glass tape

Figure 4-31 Removing the fan

PORTEGE M400 Maintenance Manual (960-541)

[CONFIDENTIAL]

4-49