Installing the hdd – Toshiba PORTEGE M400 User Manual

Page 254

4 Replacement Procedures

4.5 HDD

4-16

[CONFIDENTIAL]

PORTEGE M400 Maintenance Manual (960-541)

Installing the HDD

The following describes the procedure for installing the HDD. (See Figure 4-5 to 4-7.)

CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the

HDD.

1. Seat the HDD in the HDD holder and secure them with the following screws.

• M3.0×4.0S

FLAT

HEAD

screw

×4

CAUTION: Do not apply pressure to the middle of the HDD assembly. It may damage

the HDD assembly. Hold the HDD assembly by its corners.

2. Set the connector of the HDD cable upward and connect the HDD assembly to the

connector. Press the HDD assembly to ensure a firm connection.

3. Set the HDD assembly into the slot.

4. Seat the HDD cover and secure it with two screws (with e-ring).