2 raid : not optimal – Toshiba PORTEGE M400 User Manual

Page 131

Text mode
Original mode

3.3 Check of the RAID configuration

3 Tests and Diagnostics

3.3.3.2 RAID : not OPTIMAL

ABSENT or OFFLINE is displayed

When the “ABSENT” or “OFFLINE” is displayed as shown below, the drive is
removed by the RAID console and installed again. When the drive is unlocked,
“ABSENT” is displayed. When the drive is locked, “OFFLINE” is displayed.
Repair is not needed in this case.

TOSHIBA RAID / RAID Information Display Rev xx.xx.xxxx
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.

Level

Status

Capacity

LD0 RAID-1 DEGRADE

xxGB

Write cache :

Enable

Degrade Bootup

Yes

MBR Protection

Disable

S.M.A.R.T

: Enable

Port Assign Status Size

Model

Rev

0 LD0-0 ONLINE xxGB FUJITSU---------- xxxxxxx

1 LD0-1

ABSENT xxGB FUJITSU---------- xxxxxxx

< RAID: not OPTIMAL >

PORTEGE M400 Maintenance Manual (960-541)

[CONFIDENTIAL]

3-13