Roland DR-3 - Manual (Page 91)

91
Chapter 10 Creating Your Own Kits
Ch
ap
ter
10
Selecting the Sounds
Assigned to the Pads
This selects the instruments to be assigned to the
pads.
fig.09-14d
* You cannot select bass tones for the drum parts, and
cannot select drum instruments for the bass part.
Setting the Volume
This sets the volume (the level) for each
instrument. The velocity when you actually tap
the key pads is changed within the level range set
here.
fig.09-15d
Setting the Position of the
Sound
This sets the placement (Pan) of each instrument,
with fifteen degrees of adjustment.
fig.09-16d
fig.09-pan
Naming the Kit
You can edit the name of the currently selected
kit, using up to eight characters for the name.
fig.09-17d
Press [ENTER].
fig.09-18d
Press [ ] [ ] to move to the point where you
want to enter the character(s).
Each time you press [ENTER], it switches
between upper and lower case for the text being
input.
Turn the VALUE dial to select the character.
Parameter Value
Inst
Refer to the “Instrument/Bass Tone
List” (p. 104).
Parameter Value
Level 0–15
Parameter Value
Pan L7–CENTER–R7
CENTER R7 L7 L1 R1