Roland DR-3 - Manual (Page 49)

49
Chapter 4 Controlling the Styles with a Foot Switch
Ch
ap
ter
4
Assigning Functions to the Foot Switch
You can assign functions other than starting and stopping
performances and switching verses to the foot switch.
fig.04-01p
1.
Press the [EDIT] button.
2.
Press [ ] to select a .
fig.04-02d
3.
Press [ENTER].
4.
Press [ ] [ ] to select a or a .
If you have two foot switches connected using the special cable
(PCS-31), select when making settings for the foot switch
with the white ring, and when making settings for the foot
switch connected using the plug with the red ring.
fig.04-03d
5.
Turn the VALUE dial to select the function to be assigned.
Refer to the following chart to see which functions can be
assigned.
Press [EXIT] a number of times to return to the previous screen.
With the factory settings,
is set to “INTRO/END”
and is set to “VERSE,
LOOP.”