Roland DR-3 - Manual (Page 47)

47
Chapter 3 Playing Styles (Auto Mode [AUTO])
Ch
ap
ter
3
■ Changing the Pattern Progression in Auto Mode
You can change the pattern progression
when performing in Auto mode.
1. With the performance stopped, press
[EDIT].
The Edit Menu screen appears.
fig.09-01d
2. Press [ ], select a , then
press [ENTER].
fig.09-02d
3. Press [ ], select a to be
set.
fig.09-04d
4. Turn the VALUE dial to set the value.
The letters indicates the sequence of the
verses.
The numeral represents the number of
measures performed in each verse.
When the number of measures has been
specified by means of a value that has been
set, then regardless of the original number of
measures in each verse, the verse is repeated
only for the number of measures specified.
Example: When performing a Style with a
Verse A of four measures, a Verse B of two
measures, and Verse C of two measures.
- With “ABC” for “AutoType”
The sequence with Verses A, B, and C played
once each is repeated.
fig.09-ABC4
- With “ABC4” for “AutoType”
The sequence in which four measures of
Verses A, B, and C are played is repeated.
fig.09-ABC4
5. Press [EXIT] a number of times until you
exit Edit mode.
Parameter Value
AutoType
ABC, ABC 4, ABC 8, ABC 16,
AB, AB 4, AB 8, AB 16
Verse B
(2 meas.)
Verse C
(2 meas.)
Intro
Ending
Fill-in A Fill-in C Fill-in B
Performance repeats automatically
Verse A
(4 meas.)
Verse Bx2
(4 meas.)
Verse Cx2
(4 meas.)
Intro
Fill-in A Fill-in C Fill-in B
Performance repeats automatically
Verse A
(4 meas.)