Roland DR-3 - Manual (Page 42)

42
Chapter 1 Overview of the DR-3
■ Changing the Key of the Performance ([KEY SHIFT])
Use the following procedure to change the key of the Styles and songs (transposing).
fig.01-04p
1.
Press [KEY SHIFT].
The Key Shift screen appears in the display.
fig.01-05d
2.
Set the key with the VALUE dial.
You can set the value in semitone units within the range from -12
to +12, or one octave lower to one octave higher.
This changes the key of the performance.
3.
Press [EXIT] to return to the previous screen.
To return to the original key, press [KEY SHIFT], then set the key
to “0” using the VALUE dial.
1
2
3
If notes whose pitches are
changed using the Key Shift
function are in registers that
are unplayable for the DR-3,
the notes in the expressible
range above or below that
octave are sounded.