Roland DR-3 - Manual (Page 119)

119
MIDI Implementation
A
ppen
di
ces
●Continue
Status
FBH
●Stop
Status
FCH
●Active Sensing
Status
FEH
* Once receiving Active Sensing message, DR-3 begins checking intervals of receiving messages. If an interval is over 500msec, DR-3
will stop sounding tones temporarily and not check intervals after this.
2. Messages stored in patterns
■Channel Voice Message
●Note Off
Status Second Third
9nH kkH 00H
n = MIDI Channel Number: 0H–FH (ch.1–ch.16)
kk = Note Number: 00H–7FH (0–127)
●Note On
Status Second Third
9nH kkH vvH
n = MIDI Channel Number: 0H–FH (ch.1–ch.16)
kk = Note Number: 00H-7FH (0–127)
vv = Velocity: 01H–7FH (1–127)
* For drum part, note number of stored data is as follows:
DRUM PERC
Pad number Note number Pad number Note number
Pad 1 36 (24H) (C2) Pad 1 62 (3EH) (D4)
Pad 2 38 (26H) (D2) Pad 2 63 (3FH) (D#4)
Pad 3 37 (25H) (C#2) Pad 3 64 (40H) (E4)
Pad 4 42 (2AH) (F#2) Pad 4 60 (3CH) (C4)
Pad 5 46 (2EH) (A#2) Pad 5 61 (3DH) (C#4)
Pad 6 53 (35H) (F3) Pad 6 39 (27H) (D#2)
Pad 7 51 (33H) (D#3) Pad 7 56 (38H) (G#3)
Pad 8 49 (31H) (C#3) Pad 8 54 (36H) (F#3)
Pad 9 48 (30H) (C3) Pad 9 69 (45H) (A4)
Pad 10 45 (2DH) (A2) Pad 10 75 (4BH) (D#5)
Pad 11 41 (29H) (F2) Pad 11 70 (46H) (A#4)
Pad 12 57 (39H) (A3) Pad 12 67 (43H) (G4)
Pad 13 58 (3AH) (A#3) Pad 13 68 (44H) (G#4)
* All note numbers are stored in bass part.