Naming the settings, Copying the settings, Naming the settings copying the settings – Roland DR-3 User Manual
Page 55: Ch ap ter 5
55
Chapter 5 Changing the Overall Tone of the Sound and Acoustics (TSC)
Ch
ap
ter
5
■ Naming the Settings
Select a
You can edit the name of the currently selected
Sound Shape setting, using up to six characters
for the name.
fig.09-27d
Press [
] [
] to move to the point where you
want to enter the character(s).
Each time you press [ENTER], it switches
between upper and lower case for the text being
input.
Turn the VALUE dial to select the character.
When you have finished making the setting,
press [EXIT] a number of times until you exit Edit
mode.
■ Copying the Settings
Select a
Copy the currently selected Sound Shape setting
to the User settings (U1–U8).
fig.09-28d
Turn the VALUE dial to select the number for the
Sound Shape to be copied, then press [
].
fig.09-29d
Turn the VALUE dial to select the copy-
destination Sound Shape number, then press
[
].
fig.09-30d
Press [ENTER] to execute the copy.
If you press [
], the copy is cancelled, and
you’re taken back to the screen you were in
immediately before that.
When you have finished making the setting,
press [EXIT] a number of times until you exit Edit
mode.