Roland DR-3 - Manual (Page 82)

82
Chapter 8 Creating and Performing Songs ([SONG])
■ Copying Specified Segments
(COPY)
You can copy a specified segment of a song, and
then insert the segment elsewhere in the same
song.
fig.08-copy
1. Press [SONG] so that the button lights
up, then press STEP REC [ ].
The Song Recording screen is displayed.
2. Press [EDIT].
3. Press [ ], select a , then press
[ENTER].
fig.08-16d
4. Turn the VALUE dial to select the
beginning measure of the segment you
want to copy, then press [ ].
fig.08-17d
* The maximum number of steps permitted for a song is
250. For this reason, the “EndMeas” setting cannot be
given a value that would cause the song to have more
than the maximum number of steps.
5. Turn the VALUE dial to select the last
measure of the segment you want to
copy, then press [ ].
fig.08-18d
6. Turn the VALUE dial to select the
measure in which you want to insert the
copied segment, then press [ ].
fig.08-19d
7. Turn the VALUE dial to set the number of
times the inserted pattern is to be
repeated, then press [ ].
* The maximum number of steps permitted for a song is
250. For this reason, the “Times” setting cannot be given
a value that would cause the song to have more than the
maximum number of steps.
A confirmation screen is displayed.
fig.08-20d
If you press [ ], the immediately
preceding screen returns to the display.
8. Press [ENTER] and the pattern will be
copied.
If you press [EXIT], the operation is
cancelled, and you’re returned to the
previous screen.
* Note that the copy process may take up to a minute or
more to complete when the data contains exclusive
patterns (p. 78).
9. Press [EXIT] a number of times to return
to the Song Recording screen.
If you press Stop [ ], the Song screen is
appeared.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1617 18 19 20
measure
Verse A Fill
B
Verse B
1 2 3 4
measure
5 6 7 8 9 10 11 12 13 14 15 16
Verse A Fill
B
Verse B Verse B
Verse A Fill
B
Verse B Intro
Intro
Copy