Roland DR-3 - Manual (Page 90)

90
Chapter 10 Creating Your Own Kits
You can change (edit) the settings for the User
style kits, including those for the kit instruments
and the way the sounds are played.
You can store up to 50 kits with edited settings as
“User kits.”
* Unable to change the settings for the Preset kit, with a
“P” appended to their number.
* When the unit left the factory, the User kits (U01–U50)
contained the same settings as the Preset kits (P01–P50).
* Certain data cannot be changed while it is being
performed. First stop the performance, then make the
changes.
■ How to Make the Settings
1. With the performance stopped, press
[EDIT].
The Edit Menu screen appears.
fig.09-10d
2. Press [ ], select a , then press
[ENTER].
fig.09-11d
3. Turn the VALUE dial to select the number
for the kit to be set, then press [ ].
fig.09-12d
4. Turn the VALUE dial to select the sound
group.
5. Press the pad to be edited.
There is no need to specify the pad when
“BASS” is selected for the sound group.
6. Press [ ] [ ], select the parameter to
be set.
7. Turn the VALUE dial to set the value.
8. Repeat Steps 4–7 as needed.
9. When you have finished making the
setting, press [EXIT] a number of times
until you exit Edit mode.
* When you exit Edit mode, the kit values return to those
set in the style or song (p. 63).
Displayed Group Name
DRUM Drum Set
PERC Percussion
BASS Bass
oct BASS
The bass sound one octave lower
oct BASS
The bass sound one octave higher
Display Description Page
Inst
Selects the sound assigned
to the pad.
p. 91
Level
Sets the instrument’s vol-
ume level.
p. 91
Pan
Sets the positioning (pan)
of the instrument’s sound.
p. 91
Names the drum kit. p. 91
Copies the drum kit. p. 92