Roland DR-3 - Manual (Page 80)

80
Chapter 8 Creating and Performing Songs ([SONG])
<4> Editing Songs
You can copy and delete specified segments of
recorded songs.
■ Adding Patterns In the Song
(INSERT)
This operation inserts a pattern at a point within
the song.
fig.08-ins
* Patterns are inserted in units of a whole pattern.
You cannot specify only a certain number of measures
within a recorded pattern to be inserted.
* You cannot turn the VARIATION on and off or add fill-
ins. If you want to turn the VARIATION on or off, or
add a fill-in, first insert the pattern, then edit using Step
Recording.
1. Press [SONG] so that the button lights
up, then press STEP REC [ ].
The Song Recording screen appears.
fig.08-07d
2. Press [ ] [ ] until the measure in
which you want to insert a pattern is
displayed.
3. Press [EDIT].
fig.08-08d
4. Select a , then press [ENTER].
fig.08-09d
5. Turn the VALUE dial to select the Style of
the pattern to be inserted, then press [ ].
fig.08-10d
6. Turn the VALUE dial to select the pattern
to be inserted, then press [ ].
fig.08-11d
7. Turn the VALUE dial to set the number of
times the inserted pattern is to be
repeated, then press [ ].
* The maximum number of steps permitted for a song is
250. For this reason, the “Times” setting cannot be given
a value that would cause the song to have more than the
maximum number of steps.
A confirmation screen is displayed.
fig.08-12d
If you press [ ], the immediately
preceding screen returns to the display.
8. Press [ENTER] and the pattern will be
inserted.
If you press [EXIT], the operation is cancelled,
and you’re returned to the previous screen.
9. Press [EXIT] a number of times to return
to the Song Recording screen.
If you press Stop [ ], the Song screen is
appeared.
Intro
1 2 3 4 5 6 7 8 9 10 11 12
measure
Verse A Fill
B
Verse B
Intro Verse A Fill
B
Verse B Verse B
Verse B
Insert
Measure to be specified
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
measure