Roland DR-3 - Manual (Page 40)

40
Chapter 1 Overview of the DR-3
■ Starting and Stopping Performances and Recording
Use these buttons to start, pause, stop, and record performances of Styles and songs.
fig.01-plystp
START [ ]
Press START [ ] when the performance is stopped to start the performance of the Style or
song.
When you press START [
] while the performance is playing, the performance of the Style
or song is paused. Press the button once again to resume the performance from the point where
it was paused.
If you press START [
] while Step Recording (STEP REC [ ] lit) is in progress,
Realtime Recording will start.
STOP [ ]
This stops the performance and recording of the Style or song.
STEP REC [ ]
This starts Step Recording of Styles and songs.
If you press START [
] while Step Recording (STEP REC [ ] lit) is in progress,
Realtime Recording will start.
Realtime recording...p. 65, p. 77
Step recording...p. 67, p. 76
Notes Concerning Editing and Recording
Edited or recorded data is not saved if the power is turned off while editing or
recording is still in progress. Be sure to carry out the following.
- To quit editing, press [EXIT].
- To finish recording press STOP [ ].
The message “Keep Power ON! Now Working...” appears when these operations are
in progress.
Never turn off the power while this message is displayed.