Roland DR-3 - Manual (Page 100)

100
Message List
Message Keep Power On!
Now Working...
Cause Data is being saved to memory.
Action Never turn off the power while this
message is displayed. This may cause
damage to the internal memory,
rendering it useless.
Message Battery Low!
Cause The DR-3’s batteries are running low.
Action Use the AC adapter, or change the
batteries promptly (p. 15).
Press any button to clear the message.
Sounds may become distorted, or the
DR-3 may not operate correctly if you
continue to use it in this condition.
Message Can Not Edit!
Cause Unable to change the settings for the
Preset Styles, Preset kits, or TSC presets
with a “P” appended to their number.
Action Select User Styles, User kits, and TSC
presets with a “U” appended to their
number.
Action When basing your data on Preset data,
copy the preset data to the User
memory before changing the settings.
Message Can Not Record
Cause Unable to record on the Preset Styles.
Action Select User Style and record
performance.
Message Data Empty!
Cause No data.
Massage Memory Full!
Cause Memory is full.
Action Try the operation once again.
Action Delete unneeded patterns or songs
(p. 73, p. 85).
Message Song Data Full!
Cause No space remains in the song for any
more patterns to be recorded.
Action You can record or copy up to a
maximum of 250 patterns in one song.
Message Excl. Ptn Full!
Cause The exclusive patterns for songs are full
(p. 78).
Action To continue recording or copying, first
delete the exclusive patterns.
Message Stop SEQ!
Cause The operation you attempted cannot be
carried out while a Style or song is
being performed or recorded.
Action Press STOP [ ] to stop the
performance or recording of the Style
or song, then try the operation again.
Message MIDI Off Line!
Cause A MIDI Active Sensing error has
occurred. A abnormality has been
detected in the device or cable
connected to MIDI IN.
Action Check the device or cable connected to
MIDI IN.
Message MIDI Full!
Cause Too many MIDI messages were
received all at once, and the DR-3 was
unable to process all of them.
Action Reduce the volume of the MIDI
messages being sent by the
transmitting device.
Message Too Busy!
Cause The system attempted to concurrently
process abnormally large amounts of
data, but was unable to succeed.
Action Make sure that the unit is not being
forced to handle an overly large
amount of data (in patterns, or received
MIDI messages) all at once, and try to
reduce the amount of data.
Message System Error!
Cause An unknown error has occurred in the
system.
Action Immediately stop using the unit, and
consult your dealer or nearest Roland
Service Center.