Roland DR-3 - Manual (Page 88)

88
Chapter 9 Changing the Operating Environment (System)
These settings include those for the DR-3’s pad
sensitivity, Master Tuning, and other global
settings.
■ How to Make the Settings
1. With the performance stopped, press
[EDIT].
The Edit Menu screen appears.
fig.09-01d
2. Press [ ], select a , then
press [ENTER].
fig.09-02d
3. Press [ ] [ ], select the parameter to
be set.
4. Turn the VALUE dial to set the value.
5. When you press [EXIT], the setting is
changed, and you’re returned to the
previous screen.
Display Description Page
Output
Sets the parts output from
the OUTPUT jacks.
p. 89
Auto
Type
Changes the pattern progres-
sion when performing in
Auto mode.
p. 47
FS1
Assigns the function con-
trolled with Foot Switch 1.
p. 49
FS2
Assigns the function con-
trolled with Foot Switch 2.
p. 49
PadSens Adjust the pad sensitivity p. 89
Mstr
Tune Sets the reference pitch for
the bass part.
p. 89
Click
Level Adjusts the volume of the
metronome sound.
p. 89
Sync
When connecting an external
MIDI device and synchroniz-
ing the performance, this de-
termines whether the DR-3 is
to be the slave.
p. 95
Drum
MidiCh Sets the MIDI channel for the
drum part.
p. 94
Bass
MidiCh Sets the MIDI channel for the
bass part.
p. 94
TORY
RESET>
Restores all of the settings to
the original factory settings.
p. 18
Display Description Page