Roland DR-3 - Manual (Page 59)

59
Chapter 6 Performing with the Pads
Ch
ap
ter
6
Playing Drum Sounds
1.
Press [INST] a number of times until “DRUM” appears in the
display.
fig.06-02d
2.
Tap the pads to perform.
The instrument sounds assigned to the pads are played.
The names of the assigned instruments are printed under the pads.
Playing Percussion Sounds
1.
Press [INST] a number of times until “PERC” appears in the
display.
fig.06-03d
2.
Tap the pads to perform.
The instrument sounds assigned to the pads are played.
Playing Bass Sounds
1.
Press [INST] a number of times until “BASS,” “oct BASS”
or “oct BASS” appears in the display.
fig.06-04d
2.
Tap the pads to perform.
The bass sound is played at the pitch assigned to a particular pad.
The bass sound stops playing when you release the pad.
The names of the notes assigned to the pads are printed under the pads.
For details on the sounds
assigned to the pads, refer to
the “Preset Kit List” (p. 106).
NOTE
You cannot play more than
one bass sound at the same
time.