RAD Data comm ASMI-450 - Manual (Page 81)

ASMi-450 Control from the Control Port
ASMi-450 Installation and Operation Manual 4-23
INIT DB ----------------------------------------------------------------------------------------
Purpose Load a specified set of default parameters values instead of the user configuration (Table
4-3).
Format INIT DB
Use 1. Type
INIT DB
2. The ASMi-450 will display the TIME and DATE fields followed by the ASMi-450
prompt.
Table 4-C. ASMi-450 Default Configuration Used with Control Terminal
Parameter Type Parameter Designation Default Value
General
PASSWORD
NODE (node number)
CLEAR SCREEN
CURSOR HOME
CURSOR RIGHT
ASMI
0
00000000
00000000
00000000
System
CLK_MASTER
ACTIVE TS
EXT
Maximum supported on the ASMi-450 model
SP
(Control Port)
SPEED
DATA
PARITY
INT
PWD
LOG_OFF
CTS
DSR
DCD_DEL
POP_ALM
AUTO
8
NONE
DCE
NO
NO
=RTS
ON
0_MSEC
NO
INIT F -------------------------------------------------------------------------------------------
Purpose Resets the terminal control codes used to clear the terminal screen, to move the cursor to
the right, and to return the cursor to the home position to 0.
Format
& Use INIT F