RAD Data comm ASMI-450 - Manual (Page 68)

ASMi-450 Control from the Control Port
4-10 ASMi-450 Installation and Operation Manual
CLR TST---------------------------------------------------------------------------------------
Purpose Deactivate all the user-initiated tests and loopbacks.
Format CLR TST
Use 1. To deactivate all the user-initiated tests and loopbacks, type:
CLR TST
2. You will see the time and date, followed by the ASMi-450 prompt.
3. If no test or loopback is now activated, you will receive ERROR 2.
DATE -------------------------------------------------------------------------------------------
Purpose Set the date for the ASMi-450 internal real-time clock.
Format DATE
Use 1. Type
DATE
2. The ASMi-450 sends the date entry form:
DAY = 06
MONTH = 09
YEAR = 1995
3. Bring the cursor to the first field to be changed by pressing .
4. To change the selected field, press F to increase and B to decrease the displayed
values. When done, press to move to the next field.
5. To end, press after the YEAR field. The ASMi-450 will display the TIME and
DATE fields (note that DATE has changed), followed by the ASMi-450 prompt.
DEF AGENT ----------------------------------------------------------------------------------
Purpose Display and modify the current SNMP agent parameters. Refer to Appendix B for
additional explanations.
To enable SNMP and Telnet management, it is necessary to define all the parameters.
Format DEF AGENT
Use 1. To define the SNMP agent parameters, type:
DEF AGENT
2. You will see the entry line for the first parameter, TELNET_APATHY_TIME.
3. After selecting the desired value, press to display the second line. If you do
not want to change the current value of a parameter, press to confirm it and
continue to the next line, otherwise type in the new value and then press .
Repeat the procedure until all the parameters are defined, and then press to end.