RAD Data comm ASMI-450 - Manual (Page 113)

ASMi-450 Installation and Operation Manual C-1
Appendix C
Installation in 19" Racks
C.1 General
The ASMi-450 can be installed in 19" racks. Unit height corresponds to 1U
(1.75"), and the width is slightly less than half of the available mounting width.
Two rack adapter kits are available; one kit provides the hardware necessary for
installation of a single unit, and the other provides the hardware necessary for
installation of two units, side by side.
This Appendix provides step-by-step installation instructions for each option.
Warning
Disconnect all the cables from the units, and then disconnect the units from
power while performing the following procedures.
Always observe standard safety precautions during installation, operation,
and maintenance of this product.
No internal settings, adjustment, maintenance, and repairs may be
performed by either the operator or the user; such activities may be
performed only by a skilled technician who is aware of the hazards
involved.