RAD Data comm ASMI-450 - Manual (Page 112)

SNMP Management
B-8 ASMi-450 Installation and Operation Manual
B.4 SNMP Traps
The SNMP agent of the ASMi-450 supports the standard MIB-II traps. In
addition, ASMi-450 reports alarm conditions to the management station by
mean of specific traps:
•
When an alarm condition occurs, the ASMi-450 sends a
modmSaAlarmTrap which carries all the alarms active at the time the trap
is sent.
•
Whenever LED's on its front panel change state, the ASMi-450 sends a
modmSaLedTrap which reports the state of the LED's on both the local
(central) and remote ASMi-450 units.