RAD Data comm ASMI-450 - Manual (Page 31)

ASMi-450 Installation and Operation Manual 2-1
Chapter 2
Installation
2.1 General
The ASMi-450 is delivered completely assembled. It is designed for installation
as a desk-top unit or for mounting in a 19" rack.
Mechanical and electrical installation procedures for the ASMi-450 are
provided in the following paragraphs. For rack installation instructions, refer to
Appendix C.
After installing the unit:
•
Refer to Chapter 3 for system configuration information and procedures
using the front panel controls.
•
Refer to Chapter 4 for system configuration procedures using an ASCII
terminal connected to the ASMi-450 control port.
In case a problem is encountered, refer to Chapter 5 for test and diagnostics
instructions.
Warning
No internal settings, adjustment, maintenance, and repairs may be
performed by either the operator or the user; such activities may be
performed only by a skilled technician who is aware of the hazards
involved.
Always observe standard safety precautions during installation, operation,
and maintenance of this product.